1. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY

(a) Pass the hood lock control cable assembly into the engine compartment.

(b) Pass the cable rear side through the grommet until the cable stopper is attached to the grommet.

(c) Pass the cable front side through the upper radiator support.

(d) Engage the cable to the clamps as shown in the illustration.

2. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

(a) Connect the hood lock control cable assembly to the hood lock control lever sub-assembly.

(b) engage the 3 claws to install the hood lock lever

3. INSTALL HOOD LOCK ASSEMBLY

(a) Apply MP grease to the sliding areas of the lock.

(b) Connect the connector.

(c) Connect the hood lock control cable.

(d) Install the hood lock.

(e) Install the 2 bolts and nut.

Torque: 8.0 N·m (82 kgf·cm, 71 in·lbf)

4. INSTALL HOOD LOCK CONTROL CABLE COVER

(a) Engage the clamp and install the hood lock control cable cover.

(b) Install the screw.

(c) Install the nut.

Torque: 4.0 N·m (41 kgf·cm, 35 in·lbf)